Steps to each MiRo set up.

1. You will need to unscrew and open the battery compartment on each MiRo and connect the battery pack to the cable inside the compartment.

2. Close the compartment and then charge MiRo using a charger until the light on the charger goes green - would be best to just do this overnight.

3. Download the MiRoAPP onto an Android phone from the Google Play Store

4. Turn each MiRo on and wait for the blue light to stop flashing, you can then connect to the MiRoAPP and change the WiFi credential, the robot will need to be turned off then on again after this.

5. Update each MiRo through the MiRoAPP by following the instructions in the red button link. This can take up to an hour for each robot, press OK on any error messages and if the progress continues then that is fine but if more errors come up please contact us.

   <—————————-

6. Once the robot is updated, unscrew the battery pack, disconnect the battery and replace the lid with the battery pack inside the robot but disconnected (as shipped). Ensure each box has the appropriate contents before sealing up.

7. Write the serial numbers of each of the 6 robots down, and on their box, and email these to Consequential Robotics.

8. Print off the shipping labels and attach these to the boxes.